I am desperate for a correct wiring diagram for my 82 GS1100e

[UScrosser]

I am almost finished restoring my 82 GS1100ez. I have been using the 1980-81 Chiltons and a downloaded factory manual. In the download of the factory manual the pic is too blurry to read!
After 12 years I am ready to start it for the first time. Unfortunately my oil pressure light doesn't come on when I turn on the ignition, my side stand warning light comes on and goes off as soon as I crank the engine over acting like the oil light. (side stand is up). There is no side stand switch on the 81 (?) it does not exist in the colored Chiltons diagram.

Sure wish I could find a colored legible diagram for the 1982 GS1100EZ.

Can anybody help?
Thanks, UScrosser (Rode this bike across the country, 10,000 miles in 7 weeks in 2000)

[Rich82GS750TZ]

did you try here:

https://gsarchive.bwringer.com/

[dgates1]

This one shows the side stand switch. G/W wire.

https://gsarchive.bwringer.com/bikecliff/images/GS1100wiringdia_.jpg

[UScrosser]

Awesome David, this one I can read! Thank you!
I used a test light to verified that there is pressure and the sending unit works.
Looks like the side stand is Green/white and the oil pressure sender is Green/yellow.
Time to put on my glasses and work my way upstream.

My gs.jpg