Announcement

Collapse
No announcement yet.

Starting problem, Please help!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Starting problem, Please help!

    Hello, I put new battery in. Turned the key the Bike nutral light came on but nothing else happened.

    then a spark frome something near the batter box. Now nothing comes on or lights up.

    I had some wires disconected and I think I put them in the right spots.

    I don't have a manual. does anyone have wiring diagrams?

    Thanks for you help in advance

    #2
    It might help to know what kind of bike it is; model, year, displacement, etc.

    Comment


      #3
      Sorry, 82 Gs650E

      Comment


        #4
        A flame?

        got any residual burning smell?

        maybe your lucky and a corroded fuse decided to die in a spectacular fashion.

        Comment


          #5
          No flame. Just a quick spark like and no smell.

          Comment


            #6
            so lets assume everything is stable
            dc the battery for now
            ,making sure you had connected the poles of the battery correctly.

            check the fuses

            old bikes are likely to have a nasty amount of corrosion.
            you may be in for a bit of tedious cleaning work.

            Bascliff's website has a manual for your bike I thibnk so take a look there.

            got pics of this?

            Comment


              #7
              I will DC battery, and check fuse's. I will take photos of it now and after i reconect to be sure they are the same. I am not sure if at some point i connected the battery reversed. could this have done it?

              thanks for your help.

              Comment


                #8
                In case you don't have it, here is a link to BassCliff's website. He has your Service Manual in PDF format:

                Comment


                  #9
                  Cool, thanks for the link.

                  I just looked amd the main fuse was bad. The nutral light and oil light now come on but nothis else works, no turn signals, head light, or starter.

                  Comment


                    #10
                    hmm did yah check all the fuses?
                    and are you trying the switch in the correct psoitions?
                    The manual should have a directed troubleshooting guide to help you through this.

                    be cautious now as you may have a short circuit somehwhere you should look in the headlight buckets and so on
                    a cut or abraded wire wont go away without intervention.

                    Comment


                      #11
                      They rest of the fuses look ok but i will replace them tomorrow.

                      based on the wirring diag. the regulator/ rectifier where it connects to the frame was what sparked.

                      also I found a loose wire on the right side that comes out of the main harness. it has a washer type end. i think it may go on the right side of the starter relay.

                      I will try this and let you know.
                      Thanks

                      Comment


                        #12
                        found out that the 2 wires that connect to the tank controll the lights and starter.

                        the bike now turns over and the lights, turn signals, and horn work.

                        I still have one wire that is black with a white strip that comes out of the wire harnes on the starter side that has a washer type end.
                        i am not sure where it goes?
                        It is not the wire that goes to the right side of the starter is is already there.

                        Thanks to all for your help.

                        i have to look to see why it's not starting but I will put this in another post.

                        Comment

                        Working...
                        X