Yamaha r/r on a gs1000c

[kochic]

Hi ,
I bought a 2002 Yamaha road warrior R/R off ebay.
This is the same part number as the R1 R/R.
I already know that the grey plug is for the stator wires and the black plug is the output.
From the pics i've seen here the + is toward the center and - on the outside pin.
My question is, what is the center pin in the black plug for?
Here is a link of the R/R.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=130393359565&viewitem=&sspagename=STRK%3AMEWNX%3AIT

I'm waiting on a stock unit from Salty monk (thanks) to keep the bike alive
until i receive the Yamaha part.

Marc

[kochic]

Anyone .
Marc

[BassCliff]

Hi,

What is the part number for that unit?

The other units I've seen similar to that one have 5 wires, a group of 2 and a group of 3. In the group of 2, the outside is ground (-) and the inside connector is the hot output (+). The other group of 3, all three get connected to the stator wires.

BUT, we need to know the part number so that we can ensure the correct pinouts. Do the Yamaha parts use a sense wire? The Yamaha part number for that unit is 5JW-81960-00-00.


Thank you for your indulgence,

BassCliff

[kochic]

hi Mr Basscliff,
I checked a yamaha parts fiche site before buying this r-r.
this r-r also fit 2002-2003 r1, and i remember reading somewhere here that a 2002 r1 r-r would fit.

Its only after paying that i realised that the black plugs had 3 pins.

I was originally looking for part number 1D7-81960-00-00, but after seeing the price of this one and i purchased parts from this seller before.

Thank you,
Marc