Announcement

Collapse
No announcement yet.

Gauge Light Question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Gauge Light Question

    Well I think I have my electrical issures figured out...except one!

    The tach and speedo lights are not working. What could be the problem? I am geting power to the gray and black/white wires at the harness connector.

    I am working on a 79' GS850 G.

    Thanks!

    #2
    The black/white is a ground, you shouldn't be getting power there.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      right.

      I mean with the Volt meter .... the (-) on black/white and (+) on the gray and it reads 12V.

      Could it be a faulty ignition switch? I see the gray wire goes into the switch.

      I checked all the bulbs and they are good.

      Comment


        #4
        Well anyone had this problem before?

        The only lights that dont work are the gauge face lights..

        Comment


          #5
          Got it figured out! The gray wires came apart inside the wire loom going to the gauges. One waterproof buttsplice..problem solved!

          Comment

          Working...
          X