melted plug

[posplayr]

So I have come to the conclusion that the standard crimp-on connectors, even though new are not the best long term fix. I would ask what others that change out old connectors are using to replace them? I don't really want to start soldering all my connections but if that is the best solution to old quick connects then maybe with the charging system at least that is what I will do.

Thanks, Parker

The most critical ones for charging are all 5 wires attached to the R/R. Those should either be soldered or replaced with a descent spade. Solder is my preferred.

None of the rest of the connections effects charging but should be cleaned and protected with dielectric grease.

All other bullets should be rebent so they at least will hold together.