.png "Powered by vBulletin")
Can I use supression core wires on my 79 GS750 with stock coils and points type ignition? Thanks for any advice.
-
-
Yes but you need to use the auto type ends -
Why?.......Originally posted by SqDancerLynn1 View Postsigpic
82 GS850
78 GS1000
04 HD Fatboy
...............................____
.................________-|___\____
..;.;;.:;:;.,;.|__(O)___|____/_(O)|Comment
-
Mo'cycle spark plug caps have the resisitor (5 kilo ohm) in them because the wires do not. If you use wires with the resistance (supressors) then you dont want the caps that do.Originally posted by Octain View Post
.http://webpages.charter.net/ddvrnr/GS850_1100_Emblems.jpg
Had 850G for 14 years. Now have GK since 2005.
GK at IndyMotoGP Suzuki Display... ... GK on GSResources Page ... ... Euro Trash Ego Machine .. ..3 mo'cykls.... update 2 mocykl
https://imgur.com/YTMtgq4Comment
-
As mentioned, the caps are already "supressor" type caps.
If you install "supressor" type wires, you don't want "supressor" caps, too.
One or the other, but not both.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
Originally posted by Steve View Post
One or the other, but not both.
.
Ok, I got that
But why not?
I purchased cheepy wires at the auto parts store used with the NGK ends.
No idea if the wires are resistor type wires. What harm will if cause if they are?sigpic
82 GS850
78 GS1000
04 HD Fatboy
...............................____
.................________-|___\____
..;.;;.:;:;.,;.|__(O)___|____/_(O)|Comment
-
Originally posted by Octain View PostOk, I got that But why not?
I purchased cheepy wires at the auto parts store used with the NGK ends.
No idea if the wires are resistor type wires. What harm will if cause if they are?
some good reading on the subjectComment
-
From my understanding, you need at least one of the wires, plugs or caps to have resistors in them. A lot of bikes have the resistor caps and resistor plugs and thats fine you just wont have as much spark energy. I run non resistor plugs and non-supression wires with ngk resistor caps.Comment
Comment