Announcement

Collapse
No announcement yet.

newbie dyna coil hookup question?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    newbie dyna coil hookup question?

    does it not matter what high voltage output goes to which cylinder?
    i know that one coil goes to 1 and 4 and the other to 2 and 3... but which wire to which cylinder?

    #2
    Originally posted by jhicok View Post
    does it not matter what high voltage output goes to which cylinder?
    i know that one coil goes to 1 and 4 and the other to 2 and 3... but which wire to which cylinder?
    It doesn't matter, just so long as the leads reach and the angle of the caps is right.
    79 GS1000S
    79 GS1000S (another one)
    80 GSX750
    80 GS550
    80 CB650 cafe racer
    75 PC50 - the one with OHV and pedals...
    75 TS100 - being ridden (suicidally) by my father

    Comment


      #3
      +1. I've switched mine around before trying to isolate a problem with one cylinder not firing. Makes no difference. 1 and 4 fire at the same time and 2 and 3 fire at the same time.
      Current Bikes:
      2001 Yamaha FZ1 (bought same one back)

      Comment


        #4
        Thanks guys

        Comment

        Working...
        X