What type/model # do I get and who has the best price?
Announcement
Collapse
No announcement yet.
Dyna Ignition GS1000
Collapse
X
-
gaillarry
Dyna Ignition GS1000
Planning to get rid of the points system on my 78 GS1000. I've read all the old posts on converting to an electronic system. Dyna comes first and MSD second.
What type/model # do I get and who has the best price?Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35691
- Torrance, CA
Dyna S is what you need and Z1 Enterprises is a good retailer.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
OzJavelin
Just did the install on my '78 GS750 .. easy. When I read the instructions I thought it would be a pain, but rolling up the sleeves and getting into it, it was simple and straightforward and bike fired up first time. Go for it!
Comment
-
Dyna S, Dyna green 3 Ohm coils with 8mm suppression wires.http://www.thegsresources.com/_forum...ine=1440711157'78 GS1000E, Dyna-S ignition, Dyna Green Coils, K&N pods, Delkevic SS 4-1 exhaust, Dynojet Stage 3 jet kit, Russell SS Brake Lines, Progressive suspension, Compu-Fire series Regulator 55402 and Advmonster cree LED headlight conversion.
Comment
-
sharpy
Yes Dyna S ibnition but ill be going for Accel Coils. Just as good (if not better) and look like a standard bolt on and not a crossover from a ### harley.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter- Oct 2006
- 13994
- London, UK to Redondo Beach, California
You'll just need to get the right mounting hole & play around with the order of washers on the mounting bolts to get the right height....
I had to put mine in with the leads facing forward so they looped around & back to the plugs.1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/
Comment
-
gaillarry
Originally posted by salty_monk View PostYou'll just need to get the right mounting hole & play around with the order of washers on the mounting bolts to get the right height....
I had to put mine in with the leads facing forward so they looped around & back to the plugs.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter- Oct 2006
- 13994
- London, UK to Redondo Beach, California
Nope but this is the stock set I took off...... Imagine the Dyna coil connectors for the wires are facing forward (right in this photo) & down at about 45 degrees (as they will be if you face them forward...).
This is correct orientation... that I used
1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/
Comment
-
Rob
1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533
Comment
-
I ended up facing mine forward because the stock wires to the coils were too short to run all the way to the front of the coils. It really does not matter at all, the Dyna plug wires are long enough to go either way with wire to spare, you just have to attach the front plug wire before mounting the coils.http://www.thegsresources.com/_forum...ine=1440711157'78 GS1000E, Dyna-S ignition, Dyna Green Coils, K&N pods, Delkevic SS 4-1 exhaust, Dynojet Stage 3 jet kit, Russell SS Brake Lines, Progressive suspension, Compu-Fire series Regulator 55402 and Advmonster cree LED headlight conversion.
Comment
Comment