Announcement

Collapse
No announcement yet.

Dyna S install help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Dyna S install help

    Hi, it has been a long time since i have posted here but i am finally finding the time to work on my old GS.

    I have an 1982 gs550 that has a bad ignitor. I purchased a dyna S ignition to replace it thinking that i would take the place of the ignitor. My problem is that as i read the instructions it says to "connect the black and white wires where the original points connected"

    Granted the '82 did not have points but this would lead me to believe that i still need the ignitor???

    Looking at the wiring diagram on the other hand (http://www.powercommander.com/downlo.../DS3-1_3-2.pdf) It looks like they go directly to the coils.

    I am quite electrically challenged when it comes to motors, so any help will be appreciated.

    Thanks

    #2
    Correct. You dont need the original CDI. Wire straight to the coils per the diagram

    Comment

    Working...
    X