.png "Powered by vBulletin")
I just put a 88 GSXR750 front master assembly on my 80 GS1k cafe to fix my old one that crapped out on me. The new one has 2 terminals on it to hook up the brake light switch leads onto. The issue I have is that I cant find where the brake light switch terminals are on the factory harness. Anyone know where it splits off the main harness so I can look there and trace the wires to find out where they are now? PO didnt have a front brake switch hooked up and I bought a banjo bolt switch when I first bought the bike I wasnt able to find the wires to plug it into then either. Your help is appreciated.
-
-
The two wires for which you search will be found in the headlight bucket.
Probably green wires with orange stripes.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.) -
according to my manual for a 78E it should be an orange feed and a white back to the brake light. look in your headlight bucket and see what you can find1978 GS1085.
Just remember, an opinion without 3.14 is just an onion!Comment
-
I looked. Nothing is there. Im assuming the plugs are now tucked under the tank or the PO completely cut them out of the harness. Where could I run 2 new wires from?Comment
-
have you still got a rear brake light switch? if so you could loop 2 wires of that up to the front.1978 GS1085.
Just remember, an opinion without 3.14 is just an onion!Comment
Comment