Are silicone HT leads ok for our old zooks

[Guest]

Recently had problems with missing and put it down to the coils after some time. Swapping them out seemed to clear it up (almost but not quite 100%) and I have since replaced the old leads but think it might be a little worse.

Can anyone tell me if the silicone leads I have made up should be ok or are they not the right type of lead?

[Steve]

I see no indication that they are "suppressor" type leads, so as long as you use resistor caps (like the stock ones or the NGK replacements) you will be OK.

.

[Willmrx]

Have you checked the voltage to the coils? And have you done the relay modification yet?

Will

[Colin Green]

No and no. Something to look at today, along with re-routing some of the wiring on one of my EF's so it ain't binding.

Thanks guys.