Announcement
Collapse
No announcement yet.
Re: gs 750 et fluffy at 4500rpm limiter? import
Collapse
X
-
cudaboy
Re: gs 750 et fluffy at 4500rpm limiter? import
hello, new boy here,from wales in uk! hi all, suzuki nut and big mopar man! had 7 gs 1000, 3 gsx 750 et gt250,gt50 gsxr etc! have a gs750 16v 1980 <they called gsx750et here in uk> and at 4500 rpm looses power,pulls like mad up to that,its drawing vaccum well< balanced carbs,fuel and atu ok, checked out cdi on bench, even swapped coils today but no avail......are these limited in any way? the speedo max is 80mph,<canadian import> im struggling to get 70mph,its like the spark seems do dim at 4500 rpm, it still revs up but not quite right, any information be greatfully appreciated!Last edited by Guest; 04-10-2011, 02:58 PM.Tags: None
-
TheCafeKid
No limited as far as m aware on any GS(X) until the late late bikes. However are you running any sort of aftermarket exhaust or intake filter? Also your ignition advance mechanism may be sticking, or your ignitor gone bad..
-
Welcome to GSR.
No rev limiter.
What year is your 750? Reason I ask is to determine if electronic ignition or if braker points.
<<later note.
Oh, I should look at photo and reread your posting.
I see is a 80 , so would have electroinic ignition.
And I see it has aftermarket exhaust.
Do you know if it ever ran well with that exhaust?
.http://webpages.charter.net/ddvrnr/GS850_1100_Emblems.jpg
Had 850G for 14 years. Now have GK since 2005.
GK at IndyMotoGP Suzuki Display... ... GK on GSResources Page ... ... Euro Trash Ego Machine .. ..3 mo'cykls.... update 2 mocykl
https://imgur.com/YTMtgq4
Comment
-
cudaboy
Suzuki gsx 750
hello, atu opening up fine as rev up,no idea how ran with o/e exhausts,i got bike like this, the new pipe couldnt restrict bike that bad,ie in the way it is now, maybe give a flat spot etc the bike pulls like a train low down,real grunt just craps out like its lost compression must have some restriction as speedo ends at 85,not that it will do that as it is now but should reach 120 easy.
Comment
-
cudaboy
Originally posted by TheCafeKid View PostNo limited as far as m aware on any GS(X) until the late late bikes. However are you running any sort of aftermarket exhaust or intake filter? Also your ignition advance mechanism may be sticking, or your ignitor gone bad..
Comment
-
TheCafeKid
Nah. Later models used a full CID type with electronic advance. Yours still used a mechanical advance as far as I know. Though someone witha better understanding of how they relate would probably be able to tell you, from what I understand early ignitors are a work/doesn't work item though one side is capable of going out.
With an aftermarket exhaust I'd suspect the jetting. May pull great down low and then starve up top coming on the needle and mains. A jet kit (stage one with just a pipe, stage 3 with pods and a pipe) is in order likely
Comment
-
Just an idea to test if its not fuel delivery, exhaust related
Connect a multimeter to the ignitor orange/white wire or the coil's O/W wire and drive it up to where it is causing the problem.
Mount the multimeter to something you can see clearly and see if it drops in voltage when you hit that bad spot.
I suggest this because nearing the 5000rpm mark you reach the maximum voltage and current the unit should be getting.
But at this point your also reaching a point where the ignitor sometimes doesn't have enough power to fire properly if it isn't getting enough voltage and current.
Good luckStephen.
1981 GSX540L "Frankintwin"
1989 GS500E Resto-mod .
400 mod thread
Photo's 1
Photos 2
Gs500 build thread
GS twin wiki
Comment
-
cudaboy
Originally posted by Mekanix View PostJust an idea to test if its not fuel delivery, exhaust related
Connect a multimeter to the ignitor orange/white wire or the coil's O/W wire and drive it up to where it is causing the problem.
Mount the multimeter to something you can see clearly and see if it drops in voltage when you hit that bad spot.
I suggest this because nearing the 5000rpm mark you reach the maximum voltage and current the unit should be getting.
But at this point your also reaching a point where the ignitor sometimes doesn't have enough power to fire properly if it isn't getting enough voltage and current.
Good luck
Comment
-
cudaboy
Originally posted by Mekanix View PostJust an idea to test if its not fuel delivery, exhaust related
Connect a multimeter to the ignitor orange/white wire or the coil's O/W wire and drive it up to where it is causing the problem.
Mount the multimeter to something you can see clearly and see if it drops in voltage when you hit that bad spot.
I suggest this because nearing the 5000rpm mark you reach the maximum voltage and current the unit should be getting.
But at this point your also reaching a point where the ignitor sometimes doesn't have enough power to fire properly if it isn't getting enough voltage and current.
Good luck
Comment
-
Originally posted by cudaboy View Postany idea if gsx600f carbs fit? i checked inlet rubbers for air leaks while running with a spray and no change in rpm so they ok.....
Have you taken the carbs off and actually examined the inlets?
Not running past 4500 is a classic lean problem
Do you have the airbox on when you are trying to rev it up?
I'm guessing you have nothing on the carb mouth1978 GS 1000 (since new)
1979 GS 1000 (The Fridge, superbike replica project)
1978 GS 1000 (parts)
1981 GS 850 (anyone want a project?)
1981 GPZ 550 (backroad screamer)
1970 450 Mk IIID (THUMP!)
2007 DRz 400S
1999 ATK 490ES
1994 DR 350SES
Comment
-
BassCliff
Greetings and Salutations!!
Hi Mr. cudaboy,
Let me dump a TON if information on you and share some GS lovin'.
I just stopped by to welcome you to the forum in my own, special way.
If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....
Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", "Top 15 Tips For GS Happiness", the Carb Rebuild Series, and the Stator Papers. All of these tasks must be addressed in order to have a safe, reliable machine. Now let me roll out the welcome mat for you...
Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!
Thanks for joining us. Keep us informed.
Thank you for your indulgence,
BassCliff
Comment
-
Big T is probably on the numbers - classic lean condition.
You'll need to check the intake rubbers (nice and soft, no cracks, tight fit), vacuum hose ( no cracks or other leaks), fuel tap (allowing plenty of fuel through and not partially blocked / diaphragm not opening up fully) and if that lot is ok check your carbs are nice and clean / diaphragms aren't rotten / punctured.79 GS1000S
79 GS1000S (another one)
80 GSX750
80 GS550
80 CB650 cafe racer
75 PC50 - the one with OHV and pedals...
75 TS100 - being ridden (suicidally) by my father
Comment
-
cudaboy
Suzuki gsx 750
oh dear.........oh dear..........i know the price of fuel over $2 a litre here but WINDING all the air screws in to a point one bent................., new ones ordered,in all the way then 3 . 5 turns out? cheers for all the input should have looked at these first now fitted and refitted carbs, bloody raining here to go out and test.....Last edited by Guest; 04-13-2011, 10:04 AM.
Comment
-
cudaboy
Comment