Kick start. Thanks gents.
Announcement
Collapse
No announcement yet.
Bare minimum wiring needed to run...
Collapse
X
-
GS550Triumph
Bare minimum wiring needed to run...
Hey guys i have a gs550 motor from a 1980s bike installed on my 1968 triumph frame. Im trying to wire it up now to start and im wondering if someone could tell me the bare minimum wires i need to get it to run with a
Kick start. Thanks gents.Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35712
- Torrance, CA
The 1980's era 550's all have electric start. Those bikes also have electronic ignition. As long as you are powering the spark the bike should run. Of course, most people would prefer a charging system too, and that electric starter too since bump starting is tiring. A 1977 - 1979 550 has points and kick start. You could get away with less wiring on those bikes.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
GS550Triumph
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35712
- Torrance, CA
You simply need to power the coils/points and the bike will run. A few more thing to consider are an ignition switch, head lamp, charging system, and turn signals.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
GS550Triumph
Okay so now I realized the motor I bought had the DynaS ignition I vaguely remembering the guy telling me that when I bought it aswell. So I have the ignition all wired up now as per the DynaS instructions... I have the ignition wired up aswell as pulled my switched 12v from the switch on the drivers side handle. Im assuming I need a battery to start the motor aswell seeing as though the engine needs +12 for the coils to fire??
Comment
-
Just a chance, but…
Did I hear that Brit bikes are wired with POSITIVE as ground?
Hope you check that before you go live.
Bill1982 GS1100G- road bike
1990 GSX750F-(1127cc '92 GSXR engine)
1987 Honda CBR600F Hurricane
Comment
-
GS550Triumph
-
BassCliff
Hi Mr. GS550Triumph,
Let me dump a TON if information on you and share some GS lovin'.
I just stopped by to welcome you to the forum in my own, special way.
If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....
Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", "Top 15 Tips For GS Happiness", the Carb Rebuild Series, and the Stator Papers. All of these tasks must be addressed in order to have a safe, reliable machine. Now let me roll out the welcome mat for you...
Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!
Thanks for joining us. Keep us informed.
Thank you for your indulgence,
BassCliff
Comment
Comment