Announcement

Collapse
No announcement yet.

swapping GS1000G ignition system intoGS1100G

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    swapping GS1000G ignition system intoGS1100G

    I am putting a 1983 GS1100G motor in a 1980 GS1000G frame and need to adapt the wiring system Can anyone help me or give me instructions on how to utilise the existing GS1000G wiring into the 1100G motor.Or am I better off utilising the whole 1100G wiring loom and put it into the 1000G frame. Especially the mechanical ignition.

    Cheers

    Dave

    #2
    You can use your existing harness but will have to switch over the mechanical advance unit and signal generators from the old bike. Several members have done similar so you shouldn't have too much trouble.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment

    Working...
    X