Announcement
Collapse
No announcement yet.
Battery question.
Collapse
X
-
cal_look_zero
Battery question.
So I don't have a battery for my GS yet. I know on my quad all I had to do was install a small capacitor and I could kick it over and have it run without the battery. I'll put one in eventually (g/f doesn't want to kick start, I say she's a wimp) but for the interim do I have any sort of battery-less options?Tags: None
-
You might want to do a search on here as I've seen this question come up a few times (just don't remember all the answers). Short and sweet though - I doubt it since there's not a whole lot of other options to run your electrics unless you have a great big mouse and wheel some place.Cowboy Up or Quit. - Run Free Lou and Rest in Peace
1981 GS550T - My First
1981 GS550L - My Eldest Daughter's - Now Sold
2007 GSF1250SA Bandit - My touring bike
Sit tall in the saddle Hold your head up high
Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"
-
cal_look_zero
That's what the capacitor would be for. Basically all a battery is, is a storage/distribution device for the electricity generated by the stator. In theory, I should be able to eliminate the battery and figure out some system to hold a consistent 12-13v and whatever the required amperage to run the engine is. I would just have to kick it over a couple of times to build up enough juice to fire the plugs.
Or I could buy a battery... lol
EDIT: Little bit of research says that the stator won't work without the magnetic resistance of a battery on the receiving end. Oh well.Last edited by Guest; 05-27-2011, 11:53 PM.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35607
- Torrance, CA
Originally posted by cal_look_zero View PostEDIT: Little bit of research says that the stator won't work without the magnetic resistance of a battery on the receiving end. Oh well.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
cal_look_zero
Sorry, too much technical info swirling around in my brain. Not sure I understand it entirely. The stator needs current from the battery in order for the coils to fire? The coils have to maintain a certain resistance to run right, and eliminating the constant 12v messes with it? Sounds kind of wonky to me, but the general consensus is that you need to have some form of 12v power supply for anything to kick on. Someone on the CB forums used a 12v drill battery and a kick starter.
Comment
Comment