Announcement
Collapse
No announcement yet.
signal cover oil leak
Collapse
X
-
blue angel
signal cover oil leak
At the bottom of the cover a braided cloth looking wire enters through a elongated hole. There used to be a rubber gskt that went around the wire but it leaked so. I discarded it. I tried filling the hole and surrounding the wire with permetex form a gskt bit it still leaks. Anyone had this problem. Any ideas please. I have a Gs 1100 81 I think It's a ex not sure its chain drive and blue in color.Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35585
- Torrance, CA
Is this the small cover on the RH side of the engine? If so, there shouldn't be any oil behind the cover. My guess is the crankshaft seal is leaking. I've heard of people replacing them (check the archvies) but have never done so myself on a bike with the engine together.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
blue angel
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35585
- Torrance, CA
Originally posted by blue angel View PostThat's not cool. Yes it is the right cover. Thanks. Where do I find the archives
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
BassCliff
Greetings and Salutations!!
Hi Mr. blue angel,
Let me help you get started with all your maintenance, dump a TON if information on you, and share some GS lovin'.
I just stopped by to welcome you to the forum in my own, special way.
If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....
Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", "Top 15 Tips For GS Happiness", the Carb Cleanup Series, and the Stator Papers. All of these tasks must be addressed in order to have a safe, reliable machine. Now let me roll out the welcome mat for you...
Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!
Thanks for joining us. Keep us informed.
Thank you for your indulgence,
BassCliff
Comment
-
blue angel
Hooowdy Brother, I Did my carbs thanks to you . But before I get into the bike stuff: let me thank you for your surprising WELCOME! That was so cool. I looked at it just now to see if anyone had responsed. Oh yea nice warm welcome. I would like to put the animated symbols in this and even tried. Just to return the gratitude but didn't know how. I did the carb thing already. Took it to. A local shop to c how much it would cost to synchronize. The guy says it sounds like you have a low speed jet plugged. It stays up on high rpm to long when u rev it up. He didn't think the synchronizing would help. So yea I'm in a chrondry about that too. And of course my little oil leak. Which Ed kindly informed me about that sweet little issue. Yep project bike. It seems its parked more than driven. I like the blue machine though oddly enough. She kinda grows on ya. So thanks to all and I appreciate all the help you guys can give. This is a great forum how others help others out
Randy
Comment
-
If you have a high idle then it says you also have a vacuum leak some place. In that maintenance list you'll see the points about changing out your intake boots (IF NEEDED) and your intake orings - definitely. This along with sealing up your air box should help that.Cowboy Up or Quit. - Run Free Lou and Rest in Peace
1981 GS550T - My First
1981 GS550L - My Eldest Daughter's - Now Sold
2007 GSF1250SA Bandit - My touring bike
Sit tall in the saddle Hold your head up high
Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"
Comment
Comment