Announcement
Collapse
No announcement yet.
Sonofa!
Collapse
X
-
Hummer
Sonofa!
Frickin rebuild!!! One step forward and three back. I was trying to reroute my wiring from the handlebars back to the main harness and noticed that the ignition wires were stuck. I couldn't budge them. Took off the top clamp and voila! Sandwiched wires, broken to the point of near vaporization. Too angry to even snap a pic. Looks like it's time to pull out the soldering gun...Tags: None
-
Suzuki_Don
If you are going to solder all the wires in doing this repair then stagger the joints so you don't end up with one big bulky blob in the wiring harness.
-
Hummer
Wooooo-sa! It's a new day.
This is just an opportunity to do things right. I had run all my wiring through the handlebars. Since I'm pulling out the soldering gun, I'll lengthen the wiring harness where needed so I can keep the harness running in the original channels.
Just a PITA, although I'm sure this won't be the last setback.
Thanks for the recommendation Don - probably would have slipped my mind!
Comment
Comment