.png "Powered by vBulletin")
I am about to install new green 3 ohms Dyna coils on a 1978 VS 1000 with a Dyna-S fitted. I also have a set of red Dyna solid copper wires with non resistance automotive plug boots. They are in much better shape than my stock resistance boots. Should I clip off the new boots and install the original resistance boots, or keep the new ones? Coil mod has also been done.
-
1978 GS 1000 (pods, V&H 4 to 1, Dyna S, Dyna coils, stage 3 jet kit, Progressive springs, relay mod, 530 chain, Honda regulator, clutch basket welded and shimmed)
1970 Honda C70 -
GS 1000. Darn smart phone corrected for me...1978 GS 1000 (pods, V&H 4 to 1, Dyna S, Dyna coils, stage 3 jet kit, Progressive springs, relay mod, 530 chain, Honda regulator, clutch basket welded and shimmed)
1970 Honda C70 -
Keep the new ones unless you have something like a GPS that could pick up the noise.Comment
-
You are going to like the way it runs. I went with the Dyna suppression wires, they work great.http://www.thegsresources.com/_forum...ine=1440711157'78 GS1000E, Dyna-S ignition, Dyna Green Coils, K&N pods, Delkevic SS 4-1 exhaust, Dynojet Stage 3 jet kit, Russell SS Brake Lines, Progressive suspension, Compu-Fire series Regulator 55402 and Advmonster cree LED headlight conversion.Comment
Comment