82 550m timing question

[Missile99]

This is probably a silly question but I need some reassurance.
I have just installed a Dyna S on this 550M that had a bad ignitor. The bike has a mechanical advancer with all the timing marks for the 1-4 cylinders but there is only one mark for the 2-3 cylinders, the TDC mark I believe. There are numbers 470 where the marks would be. I have attached a picture. Won't the marks be the same distance apart as on the 1-4 side? My next step will be to make my own marks. Does anyone know where the full advance is in reference to the 470 marks? Thanks for any input.

Erik

[chef1366]

Print off the timing degree wheel. Paste it to a cood solid piece of wood or cardboard about the thickness of the washer on the Dyna S.
Line up the TDC 1&4 and put the wheel on 0.
Now using static timing see where you are at and you can make your own timing marks.

http://www.thegsresources.com/garage/docs/degree_wheel.pdf

[Nessism]

Distance between T and F is the same for 1-4 and 2-3. Just measure and make your own F mark on the 2-3 side.

[chef1366]

Distance between T and F is the same for 1-4 and 2-3. Just measure and make your own F mark on the 2-3 side.

WAY too easy Ed.

[Missile99]

Thank you both very much!