Announcement

Collapse
No announcement yet.

Now I've done it

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Now I've done it

    When I set the ignition timing on my '77 GS750 with a timing light I can get the F marks to line up at idle but the advance mark doesn't quite line up when I rev it.

    So I took the points plate off to look at the mechanical advance. Everything seems to move freely. The weights move out until they hit the 2 post that are there to limit their travel. So I tried to bend the posts out slightly.

    One of the posts broke off. Now I have to replace the mechanical advance unit...if I can find one. Could that post be brazed or welded back on? Does anyone have a mechanical advance unit they want to sell?

    Brian

    #2
    Post in the "parts wanted" section.
    There's bound to be someone that has one.
    Check eBay?
    1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
    1985 GS1150ES stock with 85 Red E bodywork.

    Comment


      #3
      There's a whole slew of them on E-bay, varying years and prices, here's the link to the page, have fun!

      http://motors.shop.ebay.com/i.html?_...0+points&_scat=
      sigpic
      Steve
      "The world is a book, and those who do not travel read only one page."
      _________________
      '79 GS1000EN
      '82 GS1100EZ

      Comment


        #4
        Originally posted by sedelen View Post
        There's a whole slew of them on E-bay, varying years and prices, here's the link to the page, have fun!

        http://motors.shop.ebay.com/i.html?_...0+points&_scat=
        Thanks But I need the mechanical advance unit...not new points.

        Comment


          #5
          Originally posted by gssuzukixxx View Post
          Thanks But I need the mechanical advance unit...not new points.
          Oh, me bad! A Suzuki Advance Governor Assembly.
          Be careful, I think there might be two different manufacturers, this I can tell you, they're no longer available new from Suzuki, I just checked, perhaps you can find one here! Have Fun!

          http://motors.shop.ebay.com/i.html?_...dvance+&_sacat=
          sigpic
          Steve
          "The world is a book, and those who do not travel read only one page."
          _________________
          '79 GS1000EN
          '82 GS1100EZ

          Comment


            #6
            Originally posted by sedelen View Post
            Oh, me bad! A Suzuki Advance Governor Assembly.
            Be careful, I think there might be two different manufacturers, this I can tell you, they're no longer available new from Suzuki, I just checked, perhaps you can find one here! Have Fun!

            http://motors.shop.ebay.com/i.html?_...dvance+&_sacat=
            That is exactly what I need. looks like it was a costly mistake for me.

            Comment


              #7
              Originally posted by gssuzukixxx View Post
              That is exactly what I need. looks like it was a costly mistake for me.
              Costly?

              Look again, there are SEVEN of them that are $30 or less, including shipping.

              .
              sigpic
              mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
              hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
              #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
              #2 son: 1980 GS1000G
              Family Portrait
              Siblings and Spouses
              Mom's first ride
              Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
              (Click on my username in the upper-left corner for e-mail info.)

              Comment

              Working...
              X