coil mod question

[tlg1100]

Not really electric wizard,so would like to ask a few questions about coil mod ? first thing is do the stock wires to both coils go to #86,and optional lead for dyna dont understand do you just splice into wire going to coils and whats with the dyna s right by the coils,I have dyna ingnition and coils...I thought these coil had to be signaled seperately to fire off this looks like same wire to both, sorry just dont understand??It looks simple enough to do, just want to understand it !!

[BassCliff]

Hi,

I can't tell you what's going on with that Dyna stuff. But here's regular stuff:

Coil Relay Modification
(by Mr. oldryder and Mr. Matchless)

More On Coil Relay Modification

#86 connects to the wires coming from the kill switch. #87 connects to the coils. (#30 connects to battery positive, #85 connects to ground.) What you are adding a relay to is the 12v supply wires to the coils (the primary side), not the signal wires. The signal wires from the igniter unit remain untouched.

If you do have a Dyna ignition, then here is some more info:

Dyna-S Coil Relay Mod
(by Mr. posplayr)


Thank you for your indulgence,

BassCliff