Announcement

Collapse
No announcement yet.

Overkill?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #2
    I wouldn't think so. Go for it.

    Comment


      #3
      Are you intending to use those weatherpack connectors to connect the stator wires? If so, they may be on the small side as most weatherpacks are intended for sensor or low current acuators.

      The info shows 14 amp. 60 volt maximum current but that sounds high for these types of connectors if they mean the rating to be 14 amps. per circuit......

      0.6 mm is about 22 (AWG) guage unless I am off target. 22 guage would be far smaller diameter wire than I could recommend for this purpose.

      I like 14 guage (or 16 guage if forced) for this type of circuit which is far larger wire size. You would be advised to use a heavier connector, IMO.

      Comment


        #4
        Originally posted by Normk View Post
        Are you intending to use those weatherpack connectors to connect the stator wires? If so, they may be on the small side as most weatherpacks are intended for sensor or low current acuators.

        The info shows 14 amp. 60 volt maximum current but that sounds high for these types of connectors if they mean the rating to be 14 amps. per circuit......

        0.6 mm is about 22 (AWG) guage unless I am off target. 22 guage would be far smaller diameter wire than I could recommend for this purpose.

        I like 14 guage (or 16 guage if forced) for this type of circuit which is far larger wire size. You would be advised to use a heavier connector, IMO.
        What would you think of this one? (yes, for the stator wires)



        Curiously, it has the same rating.

        Comment


          #5
          If you insist on sealed connectors, try THESE from Eastern Beaver.

          They also have a bunch of other connectors that are not sealed, so browse around.

          .
          sigpic
          mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
          hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
          #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
          #2 son: 1980 GS1000G
          Family Portrait
          Siblings and Spouses
          Mom's first ride
          Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
          (Click on my username in the upper-left corner for e-mail info.)

          Comment


            #6
            Originally posted by Steve View Post
            If you insist on sealed connectors, try THESE from Eastern Beaver.

            They also have a bunch of other connectors that are not sealed, so browse around.

            .
            Shipping is $21.00 from Eastern Beaver, seems a little steep for my purposes.

            I don't insist on sealed connectors but for roughly the same cost I figure it cant hurt.

            Comment


              #7
              I did not check on that part, but I have ordered from E.B. several times and never thought the shipping was out of line.

              Maybe it's lower for larger orders?

              .
              sigpic
              mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
              hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
              #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
              #2 son: 1980 GS1000G
              Family Portrait
              Siblings and Spouses
              Mom's first ride
              Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
              (Click on my username in the upper-left corner for e-mail info.)

              Comment


                #8
                Originally posted by Steve View Post
                I did not check on that part, but I have ordered from E.B. several times and never thought the shipping was out of line.

                Maybe it's lower for larger orders?

                .
                According to this page the shipping works in ranges as follows;

                under $20 - $5,000 (This is how they enforce a $20 minimum )
                $20-$120 - $21
                $120-$200 - $14
                $200-$300 - $12
                $300+ - $10

                Comment


                  #9
                  OOOHHH!!!

                  Hold the phone, I'm wrong...

                  its 21%!

                  So on an order of $20, shipping would be $4.20.
                  That IS reasonable!

                  I'd still need to find $20 worth of things to buy though...

                  Comment


                    #10
                    Just put in an order for these....

                    Black Sumitube W3B2 1/4x4
                    Item# BSTW3B2144 $1.00 USD 1 $1.00 USD 3 Position Metri-Pack 280-1412 Connector
                    Item# MP280-3P-1412 $3.95 USD 1 $3.95 USD Metri-Pack 280 Female terminal for wire sizes 14-12AWG
                    Item# MP280-F-14-12 $0.24 USD 3 $0.72 USD Metri-Pack 280 Male terminal for wire sizes 14-12AWG
                    Item# MP280-M-14-12 $0.23 USD 3 $0.69 USD Metri-Pack 280 Seal for wire sizes 18-12AWG
                    Item# MP280-S-18-12 $0.16 USD 6 $0.96 USD Posi-Lock Blue PL1416
                    Item# PL1416 $0.75 USD 5 $3.75 USD Posi-Tap Blue PTA1416
                    Item# PTA1416 $1.00 USD 1 $1.00 USD M5 Hero 3mm Ring Terminal
                    Item# BLA-205 $0.35 USD 2 $0.70 USD Yazaki 2 sq mm Male Tab Terminal
                    Item# YMTT2 $0.12 USD 10 $1.20 USD Yazaki 2 sq mm Female Receptacle Terminal
                    Item# YFRCT2 $0.12 USD 10 $1.20 USD Yazaki 3-5 sq mm Female Receptacle Terminal
                    Item# YFRCT3-5 $0.13 USD 5 $0.65 USD Yazaki 3-5 sq mm Male Tab Terminal
                    Item# YMTT3-5 $0.13 USD 5 $0.65 USD Female .250 Receptacle Sheath
                    Item# F-250-RS $0.25 USD 10 $2.50 USD Male .250 Tab Sheath
                    Item# M-250-TS $0.27 USD 10 $2.70 USD ATM Cooper-Bussman Weatherproof Fuseholder
                    Item# ATMCBFH $2.49 USD 1 $2.49 USD 20A ATM Fuse
                    Item# ATM20 $0.25 USD 2 $0.50 USD

                    Took quite a while to find enough things to make my order over $20

                    Comment


                      #11
                      I thought their rating must be for a generic ad.

                      2.5 mm wire should do nicely.



                      Comment


                        #12
                        My gosh, the world has shifted! Someone from Toronto admitting to be wrong?

                        Running for cover!



                        Originally posted by Adler View Post
                        OOOHHH!!!

                        Hold the phone, I'm wrong...

                        its 21%!

                        So on an order of $20, shipping would be $4.20.
                        That IS reasonable!

                        I'd still need to find $20 worth of things to buy though...

                        Comment

                        Working...
                        X