Need help with 1983 GS550 Ignition

[Puddlejump]

I recently came across a 1983 GS550L, and bought it for my wife. It had a basterdized ignition system. Previous owner cut out the igniter, and the pickups and put in a Dyna S. Which wont work without the advance mechanism. I have since found an igniter and pickup coils. My problem is that the PO cut out the connector to the igniter, from the coil wires. I have searched high and low for the connector pinout, but cannot find it. What I need is someone who owns one, (must be 1983 GS550) to tell me what wires go to which pin on the igniter. I have all the schematics and thats fine, but nowhere is there mention of which wire goes to which spade lug. As the diagrams do not mention the terminal numbers, and I do not have the original connector, I need to know which wire goes where. I have supplies a picture of mine and labeled the contacts. If anybody would be kind enough to open the covers and tell me where they go, it would be greatly appreciated and I can stop my wife, from killing me.

Other wise I'm gonna have to hop on my magna and drive off into the sunset or over a cliff, whichever comes first.IgniterPinout.jpg

[JEEPRUSTY]

Hi there;

The various contacts for the ignitor are in the manual.

I think Basscliff is still hosting a link to it.

The smallish socket is for the pickup coils but as to what signals what I have long forgot.

[Puddlejump]

Thanks for the pointers, but I do not have the connector that was on the wiring harness, consequently I do not know which wire goes to which pin on the igniter.



I have two Service manuals and neither states the pinout for the wiring harness side of the connector. Any picture would do.



1983 GS550L