GS1000 Reg/Rec

[Guest]

Hi all I have a GS1000 with an L model wiring loom, the loom should have a seperate regulator rectifier according to the wiring diagram, however my bike only has a combined unit, how do I wire a single unit into the wiring loom, my unit has one red and one black wire coming from it. Many thanks Wayne

[hampshirehog]

Has it not got 3 yellow wires on it as well? Or white / blue, white / green.

[Nessism]

The R/R should bypass the factory wiring otherwise you will have problems. Route stator wires directly into R/R, make sure the R/R is well grounded, and feed the power output straight into the fuse block or to the batter with a fuse in-line. Using the factory wiring is almost sure to cause problems due to the crappy head lamp stator wire loop (check the archives if you don't know what I 'm talking about).

[BassCliff]

Hi,

There's a wiring diagram on the electrical page of my little website. If your r/r unit does not have a "sense" wire, disregard that connection. Read the Stator Papers for more background and information. If you connect the r/r output directly to the battery, be sure to install an inline fuse. I use a 15 amp mini blade fuse.

Thank you for your indulgence,

BassCliff

[wdavie]

Here's apicture of the two wires that come out of my combined reg/rec, I'll see if I can work out how to wire it into the bike.

[Nessism]

Red is positive power output, black is ground.

[850 Combat]

What amperage fuse for the direct output wiring?

The R/R should bypass the factory wiring otherwise you will have problems. Route stator wires directly into R/R, make sure the R/R is well grounded, and feed the power output straight into the fuse block or to the batter with a fuse in-line. Using the factory wiring is almost sure to cause problems due to the crappy head lamp stator wire loop (check the archives if you don't know what I 'm talking about).

[Nessism]

What amperage fuse for the direct output wiring?

15 Amp should be enough.

[wdavie]

Cheers guys will sort it out this weekend, I think when I bought the project that it had a Honda reg fitted but all the wiring was burnt out etc hence the new loom, will see if I can dig out the Honda one and update the wiring with this

[tom203]

Hi,

There's a wiring diagram on the electrical page of my little website. If your r/r unit does not have a "sense" wire, disregard that connection. Read the Stator Papers for more background and information. If you connect the r/r output directly to the battery, be sure to install an inline fuse. I use a 15 amp mini blade fuse.

Thank you for your indulgence,

BassCliff

Don't you have the two red output style Shindengen- one direct to battery and one to harness?