Announcement

Collapse
No announcement yet.

No sprak

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    No sprak

    i cant seem to keep consistent spark on my 82 gs450t... i have replaced the entire wiring harness with a N.O.S. replaced the key switch replaced the hand control replaced the pickup coil and now im still not getting a consistent spark... so what next the tr ignitor? and help would be much appreciated

    #2
    Consistent?? does it run and then die out or doesn't run period? Remove tank and check for + 12 volts at coils (between orange/white wire and good ground) when ignition and kill switch are on. Have you visited Basscliff's site for tips on checking ignition problems?
    1981 gs650L

    "We are all born ignorant, but you have to work hard to stay stupid" Ben Franklin

    Comment


      #3
      What about the mechanical advance? What's the exact issue you're having?

      Comment


        #4
        the issue is sometimes i have spark other times i dont i park it running fine the next wont start(no spark) 3 hours later itll start drive it a block from home itll die(no spark) push it home park it for the day walk out to the garage the following day fires right up goes for a day or two then no spark again... thats my problem

        Comment


          #5
          right on brother...


          sorry i thought you said NO FRACK!

          actually sounds like the spark control box going bad.. that's how one of mine went.

          that same thing happened on another bike because of a hidden broken wire.
          Last edited by Eli69; 03-17-2012, 10:31 PM.
          2002 bmw r1150gs 1978 gs1000E skunk les pew 1979 gs1000L dragbike
          82 gs1100L probably the next project
          1980 gs1000G the ugly 1978 gs750E need any parts?
          https://m.youtube.com/watch?v=m_m2oYJkx1A
          1978 gs1000E skunk #2 RLAP

          Comment


            #6
            Someone on here recently had one which would do something like that, and when they pushed on it it would work. One suggest from Matchless was a possible dry solder joint on the board inside which makes sense. Getting into it is the problem...
            1982 GS450E - The Wee Beastie
            1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

            sigpic

            450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

            Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

            Comment


              #7
              ive tried all of this so now i think im going to try to replace the igniter...

              Comment

              Working...
              X