Wiring Connectors and Plugs.Where to find them?

[ben2go]

These are what you want:

http://stores.ebay.co.uk/towzatronics/Mini-/_i.html?_fsub=291886719&_sid=672484169&_trksid=p4634.c0.m322

They look just like the stock ones on my bike, pity there's no way I could get them by this Saturday for my Acewell install.

Those are nice but the terminals are aluminum.The ones on my GS is copper or.The ones from Vintage are copper.Dissimilar metals in contact with each other have a tendency to corrode.Dielectric grease is my friend,and my GS's friend.

[seant2h]

I'm in the process of restoring my cycle and in the process I needed to redo a few connections so I ordered some parts from z1. After crimping & soldering them, I decided I liked the solid connection and interlocking sleeves so much I ordered a bunch more and redid all of the connections on my GS. The parts I ordered are B1, B2, B3, B4 which are the male, female, and interlocking sleeves to match. They can be found on the second page of this link: http://www.z1enterprises.com/catalog.aspx?pid=SPEL1

I know it's not exactly what you asked for but after using them, it's what I prefer and would recommend. If you want to go with something to match your existing connectors, I'm pretty sure one of the connectors in that link would work too.

PS: While your at it, it's a good idea to run a wire for your coil relay mod while you have the ability to put the wire in the existing loom to make it nice and clean.

[pete]

Those are nice but the terminals are aluminum.The ones on my GS is copper or.The ones from Vintage are copper.Dissimilar metals in contact with each other have a tendency to corrode.Dielectric grease is my friend,and my GS's friend.

Yup, makes sense, didn't even think of that! I haven't seen any like that with anything other than aluminium terminals now that you mention on it... interesting.