Announcement

Collapse
No announcement yet.

dyna coils to fit gs1000e........

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    dyna coils to fit gs1000e........

    hi guys ,,are there a set of dyna coils ,that bolt and fit straight on my 1980 gs1000e and hopefully are fairly easy to completely instal ... any help would be appreciated regards oldgrumpy

    #2
    Hi,

    Z1 Enterprises specializes in quality Motorcycle parts for Honda, Kawasaki, Suzuki and Yamaha Classic Japanese motorcycles from the 1970's and 1980's.





    Dyna Dual Output 3.0 Ohm Coils (pair) DC1-1 DYDC1-1
    OEM: DC1-1 ---
    DYDC1-1. 3 ohm green coils. Replacement for factory coils. Matched to the Dyna-S Electronic Ignitions. Fatter spark means smoother running and less chance of fouling a plug. See below for plug wires.

    Check the resistance of the coils you are replacing to ensure a correct match. These coils work to replace some point system coils where the resistance is in the low to mid 3 ohm range. For some Kawasaki bikes with a resistor in the circuit (KZ1000 79 & 80), the 3 ohm coil is the best choice - just remove the ballast resistor from the circuit. If you have questions if these are correct, please call us or Dynatek at 1-800-928-3962

    Never select a coil with a lower resistance than your ignition system - this will cause the coils to overheat and burn out... It is OK to select coils with a slightly higher resistance. For example 3.0 ohm coils with a 1.5 ohm CDI ignition. While this isn't optimal, it works and allows you to switch your CDI ignition over to a Dyna-S in the future.
    $130.00


    Thank you for your indulgence,

    BassCliff

    Comment


      #3
      You might need to change the order of the stock spacers/adjust their sizes & face the wire outputs forward... I did on my 1000G
      1980 GS1000G - Sold
      1978 GS1000E - Finished!
      1980 GS550E - Fixed & given to a friend
      1983 GS750ES Special - Sold
      2009 KLR 650 - Sold - gone to TX!
      1982 GS1100G - Rebuilt and finished. - Sold
      2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!

      www.parasiticsanalytics.com

      TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

      Comment


        #4
        dyna coils too replace 1980 standard coils,,,,

        thanks guys i understood the information,,,its a great help regards oldgrumpy

        Comment

        Working...
        X