whats this??

[gruntedGS1100]

two wires are cut out the back.

[Redman]

GS1100 E?

Where are we looking? Down, under seat?

Which you asking about? THe white connector with 4 conductors? THe thin red wire with connectors? THe bare connector?

.

[Nessism]

What color are the wires? Match up the colors with those in your service manual wiring diagram.

[gruntedGS1100]

yes the gs1100E 1982. Its the plug im holding, it has to cut wires from the back, but those wires dont exist in the bike. i dont see the cut wires anywhere.

also im waiting for my service manual to come in....i had to get it from new zealand..?? anyways, does anyone know what connection that is that im holding?

[Nessism]

You didn't answer the question about the color of the cut wires.

Free manual download off Basscliff's website.

[Steve]

whats this??

What is it? Well, it appears to be a white-shelled electrical connector.


What is supposed to be connected to it?
As Nessism asked, what colors are the wires coming out the back side?

Even if two of the four are cut off flush with the connector, the remaining two might give some clues.

.

[gruntedGS1100]

missed that one!

orange with white stripe
black with yellow stripe
solid white
black with white stripe

[Nessism]

Used this wiring diagram...http://members.dslextreme.com/users/...wiringdia_.jpg

From this website...http://members.dslextreme.com/users/bikecliff/

Ignitor plug

[gruntedGS1100]

mother of god thats a maze! lol. thanks nessism, i have to get into looking at diagrams. they just confuse the bijesus out of me. always have. lol

but where does it connect to? i cant find the location??

nor the two wires that were cut

[Steve]

Anybody else see a pattern here?

two wires are cut out the back.

What color are the wires?

..., it has to cut wires from the back, but those wires dont exist in the bike. i dont see the cut wires anywhere.

You didn't answer the question about the color of the cut wires.

As Nessism asked, what colors are the wires coming out the back side.

Ignitor plug

but where does it connect to? i cant find the location??

nor the two wires that were cut

Grunted, you were told what it is supposed to connect to, now please tell us the colors of the cut wires.

.

[SqDancerLynn1]

Nessism says Igniter plug ?? Do you have a dyna Ign ?? Rewired ?

[gruntedGS1100]

Nessism says Igniter plug ?? Do you have a dyna Ign ?? Rewired ?

no?? it looks to be all stock, just the previous owner was definitely not apt on a few things.

also, ill get the cut wire colors in the AM. but that still doesnt help me to what that connector connects to.

[Nessism]

no?? it looks to be all stock, just the previous owner was definitely not apt on a few things.

also, ill get the cut wire colors in the AM. but that still doesnt help me to what that connector connects to.

It connects to the ignitor box. Please check the factory service manual, there should be a diagram showing where all the various electrical parts can be found.

[gruntedGS1100]

It connects to the ignitor box. Please check the factory service manual, there should be a diagram showing where all the various electrical parts can be found.

ive searched for this igniter box in the manual...i cant find it.

[Nessism]

You might want to pull off the ignition cover and look to see what kind of ignition is on the bike. Maybe someone installed an aftermarket ignition like the Dyna-S that does not require an ignitor. At any rate, the ignitor is typically mounted in the battery box area, commonly on the RH side of the bike.