My bike does not have an automatic release, I have to manually turn off the blinkers. Will I just need to get a different type fuse and that is all? I am trying to keep it as simple as possible.
Announcement
Collapse
No announcement yet.
LED Blinkers 650E
Collapse
X
-
LED Blinkers 650E
I am going to re-vamp my blinkers this winter on the 650E. There are some nice LED type on ebay. I have looked around the forums and found a PDF that somewhat explains what is needed for these type of bulbs.
My bike does not have an automatic release, I have to manually turn off the blinkers. Will I just need to get a different type fuse and that is all? I am trying to keep it as simple as possible.Tags: None
-
No need to change the fuse, but you WILL need to change the flasher.
Does your bike have a single indicator in the istrument panel or separate indicators for each side?
If you have a single indicator, you will need to make more modifications.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
-
GS(X)400
-
GS650E_81
Thanks for the replies!
Steve - I have two turn signal lights on my cluster, L and R. I looked at the referenced link GS(X) 400, but have a hard time following still. I am an even more complete newbie at reading electric schematics than repairing motorcycles!
So, do I need just a new flasher and diode's or just a new flasher? Seems like a lot of work for some simple LED replacements...
Comment
-
For some reason, I can't open the link that was referenced, so I don't know what's in there.
If you have separate indicator lights in your cluster, all you will need is a new flasher.
Please note, though, that most of the flashers that handle LED signals are three-pin units.
You will need to add a seperate ground wire to the third pin.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
GS650E_81
Originally posted by Steve View PostFor some reason, I can't open the link that was referenced, so I don't know what's in there.
If you have separate indicator lights in your cluster, all you will need is a new flasher.
Please note, though, that most of the flashers that handle LED signals are three-pin units.
You will need to add a seperate ground wire to the third pin.
.
Comment
-
GS(X)400
In my post i link to a 2 pin flasher thats universal for motorcycles. I have used it before and its only like 8 bucks
Comment
-
GS650E_81
So -
I will need this flasher:
This Universal Electronic LED Flasher Relay for Motorcycle supports a 0.02-20 amp range and operates on 12 VDC. Eliminates the need for load resistors; turn signals will flash at a normal rate with or without LED bulbs. Check out our Vehicle Bulb Finder.
For these signals:
Comment
-
GateKeeper
Last edited by Guest; 09-20-2012, 10:54 AM.
Comment
-
GS650E_81
GateKeeper -
I just bought a flasher from the link you provided. Thanks.
I am heading home soon to examine the current flasher. I may have a few questions about wiring when it comes to the time.
Thanks!
Comment
-
GateKeeper
hope you got the one that 2 for the price of one, I missed that, but what the hey, I doubt I will ever need another.
as for wiring, I just plugged the flasher in until I got it to work, but to use the stock wire clip I did have to swap two of the wires, see first link I posted....after that the lights went blink, blink.....
ohhhh it will be a wait for that flasher, I think the guy walked it from China to my place....LOL
Comment
-
GS650E_81
If I turn my key to on and turn the left signal on it will click over once or twice then stop. Is that normal?
Just a random question while I remembered it lol
Comment
Comment