No start

[Guest]

No start, just finish putting the engine back on my 83 GS1100E after rebuild with a DYNA S system including coils and mikuni 38mm flat slides smooth bores. Now it will not start. it try to start but after trying it shot a flame out the pipe. What could this be. I have checked the cams again and they are installed per the manual need some help

[enelson2047]

NO Start

No start, just finish putting the engine back on my 83 GS1100E after rebuild with a DYNA S system including coils and mikuni 38mm flat slides smooth bores. Now it will not start. it try to start but after trying it shot a flame out the pipe. What could this be. I have checked the cams again and they are installed per the manual need some help

[Supavert]

What's up enelson?

You might have your coil wires crossed. Check the firing order again and see if that helps. I had the same problem when I put my 83gs 1100e back together. Let us know what you get.

Peace!
Supavert