substituting wirring harness between GS1000 G & S

[coolshaft]

I would like to ask the following as I do not have a propper diagram of the G version (Australia version)
I have 2 manuals (Clymer GS1000Fours 1978-79 & Cycleserv GS1000E) and the have a lot of wirring diagrams inside but not the G shaftdrive version.
I obtained a nice wirring harness of a GS1000S 1980?

Wirring label partially readable;
A*632 3661 **70
OC321821 (or 021)

My question is can this be used on a GS1000G 8/1980 without to much alteration?
I have a GS 1000S L/H switch block as well as on mine a Yamaha block was spliced into the wirring harness!
Any links to a GS1000G diagram please?

[Johno]

Here is the 1000G wiring diagram which is located on Bass Cliff's website.

http://cid-2370b62ddf9f0c6b.skydrive...%5E_switch.jpg

You will have to have a look and determine the difference. They should be very similar.

I used an 850G harness to replace the original on my 1000G.

Also edit your profile to include your location. Lot's of members all around the world and someone with a G might be near you.

[coolshaft]

Thank You Johno, have added location

[coolshaft]

Started and made the plunge.
A fair bit of rewiring and making of different plugs involved as a 6 pin does not connect into a 9 pin with 3 separate single plugs.
And unraffeling the alterations done to graft the Yamaha switch block into the old harness.
But that is the fun of sorting it and getting a decent understanding of the system