Announcement
Collapse
No announcement yet.
gs1100e coils
Collapse
X
-
gs1100e coils
want to put new coil wires on the stock coils . what size and kind do i use and is it hard to take them out ?Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35640
- Torrance, CA
There are a number of threads on this topic in the archives so you might want to try searching for info. In a nutshell, some times the wire pulls out clean, and sometimes you need to dig it out with a pick tool of some sort. There is a spike down in the coil recess pocket so be careful not to mangle it.
7mm wires are the proper size for replacement. The stock wires are copper core, not resistor type. The stock plug caps are the resistor type. Z1 Enterprises sells wire and plug caps. You can use resistor type wire with non resistor caps if you'd rather. Don't think I'd use both resistor wire and resistor caps though.
Good luck.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
tom
Comment