Announcement

Collapse
No announcement yet.

Sh530-12

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Sh530-12

    This may be a topic that has been discussed before, but my question is concerning an SH530-12 R/R. I need to replace the one on my gs1100L 1982 model. the chart says 20 amps from this unit. will that be enough for my gs1100. all the postings are concerning gs550s it seems. thanks for any advice. they can be had on ebay for next to nothing. I hate to spend 100$ for a new one that might not be as good.

    #2
    you are better off buying new. if you buy a cheap one from ebay you cannot guarantee if it is working properly or how long it will last.

    buy a new one, with a warranty, it will work out cheaper in the long run
    1978 GS1085.

    Just remember, an opinion without 3.14 is just an onion!

    Comment


      #3
      Hi,

      I have a cheap one from eBay and it's been going great for almost 5 years.

      Yes, that r/r unit will work in your bike. If I was going to buy a brand new r/r unit I would save my pennies and get a Compufire unit. Although, I hear the Shindengen SH775 can be had new and that would be a good one too, a lot less expensive than the Compufire.


      Thank you for your indulgence,

      BassCliff

      Comment


        #4
        Originally posted by texman51 View Post
        This may be a topic that has been discussed before, but my question is concerning an SH530-12 R/R. I need to replace the one on my gs1100L 1982 model. the chart says 20 amps from this unit. will that be enough for my gs1100. all the postings are concerning gs550s it seems. thanks for any advice. they can be had on ebay for next to nothing. I hate to spend 100$ for a new one that might not be as good.
        I wouldn't use that type. Get an older Honda unit with a sense wire circuit, or a newer FET type (I have one if you are in need). No need to buy a new one, in fact most of the aftermarket R/R's are pretty junky. Get a quality used piece and save money.
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment


          #5
          r/r

          thanks for the advise!

          Comment

          Working...
          X