LED relay for indicator/blinkers - GSX750E 1981 mod

[Guest]

I have bought led indicators and relay for my bike. I have used this on many bikes before. But on this bike, there is only 2 connectors. My relay has 3.

Any idea on how to connect, or do I have to use another type of relay?

[Steve]

You will have to look at your new relay, but I believe that one connection will be for power in, another connection for flashing power out (these are the two that are already on your bike) and the third one will be for a ground. If the terminals on your new relay are next to each other, you can plug your stock connector to them (assuming the polarity is correct) and hook up a groundn wire with a spade connector to the third terminal.

The orange/green wire will be your power in, the light blue will be your flashing power out.

.

[Spiff]

I'm thinking of buying this relay from my local autostore:


Am I right in assuming that:
B=battery
E=earth
L=load or flasher out

This relay will work as long as I connect a ground wire to the third pin of the relay?

[tom203]

This looks similar look at item #2 on page -back up for info overload

http://www.superbrightleds.com/cat/flashers-load-resistors/

[GateKeeper]

this might help a bit...

http://www.thegsresources.com/_forum/showthread.php?t=196017

.