new plug wires

[Guest]

i want to replace my old coil plug wires but not sure where to go to get them. i just ordered a dyna s ingition, but cant afford the coils. is it easy to swap the wires, the old ones look molded into the coil. any answers would be great, thanks in advance.

[azr]

I've dug mine out with a dental pic. It's not always easy, sometime they come out without too much trouble and other times it's hours of picking away but they've always come out. There's a few threads on here about doing it, I can't remember the type of putty I used to seal the new wire in there but it was pretty easy to pick up at the local auto shop.

[byegge]

thanks, i read somewhere that you can cut the old wire right at the coil then use a drill bit the same size as the copper wire and dirll it out. then drill out the same on the new wires and insert a piece of thick copper wire and epoxy all together. first step is to get it running i quess, dyna s comes in the mail this week.

[Nessism]

thanks, i read somewhere that you can cut the old wire right at the coil then use a drill bit the same size as the copper wire and dirll it out. then drill out the same on the new wires and insert a piece of thick copper wire and epoxy all together. first step is to get it running i quess, dyna s comes in the mail this week.

Down in the wire recess passage there is a metal spike. If you drill out the old wire you will damage the spike.

[subid]

Check this thread

http://www.thegsresources.com/_forum/showthread.php?t=175975

[byegge]

thanks subid, im going to go this route. going wire shopping in a few days, need to find some in yellow.

[BluBul]

http://www.amazon.com/ACCEL-140403-Universal-Super-Coil/dp/B001OMKFKS/ref=sr_1_3?ie=UTF8&qid=1366926116&sr=8-3&keywords=140403

These would go well with your dyna ignition they also sell the wires by themselves

[byegge]

http://www.amazon.com/ACCEL-140403-U...eywords=140403

These would go well with your dyna ignition they also sell the wires by themselves

thanks, ill look into those. the new coils will have to wait, i have more time than money right now.