Two Questions Please

[Guest]

Hi guys

I have a 1982 GSX 1100E and am wanting to replace the spark plug caps with new NGK's. What model number cap do i need to suit my bike. It has stock coils and wires. Have looked on previous posts but can't find an answer.

Also half my warning lights don't come on when the ignition is first turned on. Reading the Haynes manual they talk about a warning light control module that's situated behind the right hand side cover. Have looked but can't seem to find anything that might be this control module. It does look like po has cut some wiring around this area and taped it all up. Any help appreciated.

Richard

[dorkburger]

Regarding the caps, I looked up my local shop (momnouth cycles). They have online parts fische. I got the part numbers from there and ordered them. As far as the wiring...I havent owned that model in about 15 years. Post pictures to help others help you

[posplayr]

Hi guys

I have a 1982 GSX 1100E and am wanting to replace the spark plug caps with new NGK's. What model number cap do i need to suit my bike. It has stock coils and wires. Have looked on previous posts but can't find an answer.

Also half my warning lights don't come on when the ignition is first turned on. Reading the Haynes manual they talk about a warning light control module that's situated behind the right hand side cover. Have looked but can't seem to find anything that might be this control module. It does look like po has cut some wiring around this area and taped it all up. Any help appreciated.

Richard

The idiot light control box is all black encapsulated about the size of a pack of cigarettes. Near the back (but under) of the gas tank,

[chef1366]

If the oil sensor is not hooked up the lights will not come on with the key on.
It is the oval sensor under the cam chain tensioner/carbs. Check the connection on it.