Announcement

Collapse
No announcement yet.

Stator - rectifier question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Stator - rectifier question

    Can you ruin the rectifier by running the bike with a bad stator or vice versa ?

    #2
    I'm sure all the electrical gurus will chime in shortly, but in a one-word answer to BOTH questions - YES!

    Comment


      #3
      If the R/R is putting out too much voltage, it could smoke your stator or ruin your battery, but you will never know until you run the tests, so it is not a good idea.
      http://www.thegsresources.com/_forum...ine=1440711157'78 GS1000E, Dyna-S ignition, Dyna Green Coils, K&N pods, Delkevic SS 4-1 exhaust, Dynojet Stage 3 jet kit, Russell SS Brake Lines, Progressive suspension, Compu-Fire series Regulator 55402 and Advmonster cree LED headlight conversion.

      Comment


        #4
        The stator puts out AC voltage to the R/R. If it goes bad, it puts out less or none at all. It will not harm your R/R by not putting out enough AC, or anything else in your electrical system because the AC stops at the R/R. If the AC side of the R/R goes bad, it could possibly take out the stator, but the likelihood is not very high.

        Comment


          #5
          Can't see how a stator could damage a R/R. R/R maybe could damage a stator (maybe) if it shunted too much current back.
          Ed

          To measure is to know.

          Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

          Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

          Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

          KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

          Comment


            #6
            I think we are on the same page there Ed.

            Comment


              #7
              Originally posted by koolaid_kid View Post
              I think we are on the same page there Ed.
              Yea, you posted while I was typing...
              Ed

              To measure is to know.

              Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

              Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

              Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

              KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

              Comment


                #8
                Thanks for the info

                Comment


                  #9
                  Originally posted by Nessism View Post
                  Yea, you posted while I was typing...
                  yea the predominate failure modes would be R/R damaging stator.

                  I will have to think more if there is any way the stator could reciprocate.

                  Comment

                  Working...
                  X