.png "Powered by vBulletin")
Good evening gents!
I have a peculiar problem. Just finished rebuilding my '83 GS850G, and started today for the first time in 7 months! Problem I'm having is cylinder 1 is not firing the plug. I have tried changing the plugs out, and cylinder 4 is firing fine. My first guess is that the wire for cylinder 1 has gone bad. In writing this, I realize I should test my theory by switching 1 and 4's wires, see if the problem follows. If it does not, I will be totally baffled, and would like some others insight.
I will update the post once I have completed my test. Also, coil checked out around 200 ohms from plug end 1 to plug end 4, and I've been using a timing light to check plug fire.
I have a peculiar problem. Just finished rebuilding my '83 GS850G, and started today for the first time in 7 months! Problem I'm having is cylinder 1 is not firing the plug. I have tried changing the plugs out, and cylinder 4 is firing fine. My first guess is that the wire for cylinder 1 has gone bad. In writing this, I realize I should test my theory by switching 1 and 4's wires, see if the problem follows. If it does not, I will be totally baffled, and would like some others insight.
I will update the post once I have completed my test. Also, coil checked out around 200 ohms from plug end 1 to plug end 4, and I've been using a timing light to check plug fire.
Comment