.png "Powered by vBulletin")
i found a place to get Connectors,placed 2 orders from them, and the connectors are a 99% a match the 8 pin for the fuse box 4, ans 3 pin all fit OEM , and shiing is fast , http://www.cycleterminal.com/motorcycle-connectors.html , just wanted to last some of you know .!!
-
-
There are several sites like that, between them you can find just about anything, but the crimping tools are the most important ingredient. http://www.vintageconnections.com/http://www.thegsresources.com/_forum...ine=1440711157'78 GS1000E, Dyna-S ignition, Dyna Green Coils, K&N pods, Delkevic SS 4-1 exhaust, Dynojet Stage 3 jet kit, Russell SS Brake Lines, Progressive suspension, Compu-Fire series Regulator 55402 and Advmonster cree LED headlight conversion. -
my ignition connector basically disintegrated.Now its wire pushed into wire,no plastic surrounding it.I bought a 4 pin connector from vintage connections,male and female ends.I cant figure out, I suppose the pins just push in, and the wires are crimped in the prongs first.I also spent $15 for the extractor tool.It has no instructions and doesnt seem to do anything to push or pull and old pin or spade out. This is probably simple, but I have never made a connector before.future owner of some year and displacement GS bike,as yet unclaimed and unowned.Comment
-
I've been out of town. this information might be late but perhaps there is something in this link that will help. http://www.oregonmotorcycleparts.com...ionRepair.htmlhttp://www.thegsresources.com/_forum...ine=1440711157'78 GS1000E, Dyna-S ignition, Dyna Green Coils, K&N pods, Delkevic SS 4-1 exhaust, Dynojet Stage 3 jet kit, Russell SS Brake Lines, Progressive suspension, Compu-Fire series Regulator 55402 and Advmonster cree LED headlight conversion.Comment
Comment