Wire Stator Directly to R/R tutorial?

[Guest]

Is there a tutorial out there for wiring the Stator directly to the R/R?

Thanks

[posplayr]

See gs charging health

[Nessism]

This may help...http://members.dslextreme.com/users/...S850stator.pdf

Find the wires for your R/R and connect them direct to the stator.

[tom203]

The 3 wires from stator pass thru the starter motor cover and come up just behind the battery. Best to remove battery to see what's happenning, then you'll find those wires lead to plugs-two stator wires go direct to R/R while a third wanders off into harness and comes back . This third stator wire needs to be altered so it also goes direct to R/R. You are bypassing the loop into the harness.

[snackie]

Just A Little More Guidance

Here's my current stock setup:
Stator has 3 wires: W/G, Y, W/Blue. The Yellow and White/Blue connect to R/R plug. The White/Green leads into the harness.

My R/R has 5 wires: R, W/Blue, W/R, Y, Black White. The Black/White is currently grounded on the frame. The other 4 wires have a plug/connector. As mentioned above, the Yellow and White/Blue connect to the stator.

My question: Do I disconnect the White/Green stator wire from the harness? And if I do, where do I reconnect it?

Thank you!

[tom203]

The white/green comes from stator, disappears into harness, and comes back as red/white to that 4 way plug and heads to R/R, Cut the white/green before it heads into harness and connect it to the red/white wire going into that plug.

[snackie]

Thanks folks.

Thanks Tom for taking the time to explain that to me. I'll try to knock it out in the next week or so.

[posplayr]

The white/green comes from stator, disappears into harness, and comes back as red/white to that 4 way plug and heads to R/R, Cut the white/green before it heads into harness and connect it to the red/white wire going into that plug.

Going through a plug is not a direct connection. I would prefer to avoid the connector all together especially if there is any evidence of heating.

[snackie]

Going through a plug is not a direct connection. I would prefer to avoid the connector all together especially if there is any evidence of heating.

No evidence of any bad heating. I will be cutting the red/white R/R wire from the connector and connecting it directly to the white/green stator wire.

Thanks guys!

[tom203]

Going through a plug is not a direct connection. I would prefer to avoid the connector all together especially if there is any evidence of heating.

Well yeah, but he was having trouble figuring which wire was which and I figured he could determine it easier by analyzing connector plug. Hopefully, he'll at least get a Shindengen R/R to replace the stock unit. a Sh-775 would be nice if he can find one.

[JimW]

Hopefully, he'll at least get a Shindengen R/R to replace the stock unit. a Sh-775 would be nice if he can find one.

They're off backorder now. I ordered one through Partzilla last night after confirming availability through two other Polaris parts dealers (part #4012941).