Announcement
Collapse
No announcement yet.
Can a CDI unit charge only one coil?
Collapse
X
-
Redekopb
Can a CDI unit charge only one coil?
I have a 1982 gs650 (Suzuki). Only get spark on 1 & 4. All other issues have been eliminated so it appears to be the CDI unit. Is it possible for the cdi to give charge to only one coil?Tags: None
-
Yes, it might be possible, but only if your bike had a CDI.
Your bike, does NOT have a "CDI".
It is an INDUCTOR DISCHARGE IGNITION, otherwise known as a standard coil-based ignition.
The box that you are thinking is a "CDI" is just a box of transistors that replace the mechanical points, and is called an "ignitor".
Now, to answer your question properly: yes, it is possible that the ignitor will only trigger one coil to fire, but it does not "charge" the coil. Technically-speaking, it DIScharges the coil when the transistors open the current path.
Before you condemn the ignitor, though, make sure all the other electrical connections are good.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35616
- Torrance, CA
Yup, no CDI on GS bikes.
Steve is showing you some tough love since it's obvious that you haven't investigated very deeply.
There are countless threads in the archives on this topic so don't be afraid to dig around. Basics include: get the factory service manual (free download available) and perform the ignitor checks. Check voltage at your coils. Switch the coils side to side and see if the problem follows the coil, or if the ignitor is at fault.
Good luck.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Redekopb
Thanks. In my investigation it seemed like it was being called various different things. The manual does call it the ignitor unit. I did swap leads of the coils resulting in spark on 2 & 3. Signal generator is good. Continuity is good from coils through to ignitor unit. Ignition switch is good by virtue of spark on two cyl. New plugs. Just needed some confirmation regarding ignitor. Hate to spend so much on something if I don't have to.
Comment
-
koolaid_kid
If you need an igniter, do not replace it with an OEM unit. Purchase a Dyna S and replace both the igniter and the signal generator.
Comment
-
82gs650
-
Originally posted by Mattius View PostMe too! Any help would be appreciated. Where can I download the service manual? I can't find it online. Thanks
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Mattius
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35616
- Torrance, CA
Originally posted by Mattius View PostThanks! What about a repair manual?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
Comment