Announcement

Collapse
No announcement yet.

coils/wires/caps... ohm my!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    coils/wires/caps... ohm my!

    Whats the best deal out there for a coil/wire/cap set up for a 80 GS850?

    #2
    The coil wires are usually epoxied into the coils, so you will have to first remove that if you really want to replace the whole wire. Most often you just need to cut 1/4 inch or so off the end of the wire (where the plug cap screws in) and you are good to go.

    NGK brand plug caps are a suitable replacement for the originals. They are available in different shapes (straight; angled) and resistance values, so make sure you get the correct specification for your bike.
    1981 GS850G "Blue Magic" (Bike Of The Month April 2009)

    1981 GS1000G "Leo" (Bike Of The Month August 2023)

    Comment


      #3
      Dyna coils from Z1 Enterprises:


      You'll also need to select a set of Dyna wires matching your color preference.
      1983 GS850G, Cosmos Blue.
      2005 KLR685, Aztec Pink - Turd II.3, the ReReReTurdening
      2015 Yamaha FJ-09, Magma Red Power Corrupts...
      Eat more venison.

      Please provide details. The GSR Hive Mind is nearly omniscient, but not yet clairvoyant.

      Celeriter equita, converteque saepe.

      SUPPORT THIS SITE! DONATE TODAY!

      Co-host of "The Riding Obsession" sport-touring motorcycling podcast at tro.bike!

      Comment

      Working...
      X