.png "Powered by vBulletin")
Is there a source for the clips that secure the plug leads into the coils? The ones on my GSX750ESD were stuck in with silicone, and barely hanging on for grim death!
Thanks in advance.
Thanks in advance.
-
1996 GSF1200 — Pretty Much Standard.
1983 GSX750ES — Cafe Racer Project
1980 GS550E — 673 Conversion.
1980 GS400 — Cafe Racer???
http://biketech7.blogspot.com.au -
There were no clips in the stock coils.
The wires were epoxied into place.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.) -
Looking at the microfiche, it shows the original leads with clips on, but only available as coil and leads together. Just wondered if anyone had ever made any aftermarket clips/leads.1996 GSF1200 — Pretty Much Standard.
1983 GSX750ES — Cafe Racer Project
1980 GS550E — 673 Conversion.
1980 GS400 — Cafe Racer???
http://biketech7.blogspot.com.auComment
-
My 85 1150 has clips to hold the wires into the stock coils, and the wires are removable. At least one clip is broken. I rigged a wire tie to secure it. Dont remember exactly how, but its been fine for several years.sigpic
When consulting the magic 8 ball for advice, one must first ask it "will your answers be accurate?"
Glen
-85 1150 es - Plus size supermodel.
-Rusty old scooter.
Other things I like to photograph.....instagram.com/gs_junkie
https://www.instagram.com/glen_brenner/
https://www.flickr.com/photos/152267...7713345317771/Comment
-
Early GS's use the epoxy but last generation bikes had the clips, which break easily. Maybe you could use epoxy like the early bikes? Not sure how well the epoxy would stick though.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
That's cool, epoxy should be fine. I was just hoping to use the original retainers. Cheers folks.1996 GSF1200 — Pretty Much Standard.
1983 GSX750ES — Cafe Racer Project
1980 GS550E — 673 Conversion.
1980 GS400 — Cafe Racer???
http://biketech7.blogspot.com.auComment
Comment