I had dropped my bike in the garage a couple weeks ago (slick oil on the ground, no apparent aesthetic damage) and when I picked it back up to check everything over I noticed my headlight was out. Since the bucket was in bad shape from the PO anyway I opted to buy a new bucket. I bought a 7" bucket (when it arrived, it was only 6.25" from bracket to bracket, but that's another story) and waited patiently. Upon installation, however, the light still doesn't work. I do not think both lights are bad and find it improbable that the last bulb would have bit the dust without cause. I read up a bit on the forums and checked the grounds - though I found nothing. My signals and dash lights work fine. The only piece on the bike that is affected is my headlight. I checked out the glass fuse under the seat, and it looks alright, though I don't know what to look for. It's certainly not burnt. Perhaps I'll replace is with a typical fuse and see if that sorts out the problem, but if I had a blown fuse I would be experiencing more electrical issues, no? Again, the only issue is my headlight will not turn on.
Input much appreciated. If anyone has a solution to hook up the undersized headlight without too much work I'd appreciate that too. In fact, I appreciate any feedback at all.
Thanks again,
GSP
Comment