82 GS550L polaris r/r install

[Steve]

STEP
1 Three wires from stator wires directly to RR
2 Cap w/r and w/g as no longer needed. (white red white green)
3 RR hot to main feed as originally wired.
4 RR hot to battery positive with 20 amp fuse installed in line.
5 RR ground to battery negative terminal.
6 RR ground to good frame ground.

Do step 3 and skip 4. See this

http://www.thegsresources.com/_forum...9&postcount=28

Actually, the important ones to do are 1, 3 and 5.

2. You don't need to cap the wires, you can simply ignore them, as they are not connected to anything.
Some have re-purposed them for other mods.
4. It is better to do #3, you definitely don't want to do both.
6. There should already be a decent factory ground. Verify this. If there is one, you probably don't need to add another.

.