Announcement

Collapse
No announcement yet.

custom taillight wiring

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    custom taillight wiring

    I am pulling my hair over a 3 wire taillight that I can't get working. It has a red, yellow and black wire. The harness has grey, white, brown and two grounds (b/w). Any ideas what goes to what? Thanks

    #2
    Do you have a multimeter? You can find out if you have power running through the harness if you do. Im assuming you had a tail light working on it before hand?

    Comment


      #3
      Draw a schematic instead of "straws"

      Comment


        #4
        Originally posted by claygs750e View Post
        I am pulling my hair over a 3 wire taillight that I can't get working. It has a red, yellow and black wire. The harness has grey, white, brown and two grounds (b/w). Any ideas what goes to what? Thanks
        your bike wiring has three none earths as you have a stop a tail and a park light sorry not sure on what colour is which
        connect earth of new light (black) to b/w turn on lights and find the live and connect to the dullest lighting of the new taillight
        then lights off foot on brake and find live and connect to brightest lighting wirer
        tape up left over wirer to stop it earthing

        Comment


          #5
          Originally posted by cougar View Post
          your bike wiring has three none earths as you have a stop a tail and a park light sorry not sure on what colour is which
          connect earth of new light (black) to b/w turn on lights and find the live and connect to the dullest lighting of the new taillight
          then lights off foot on brake and find live and connect to brightest lighting wirer
          tape up left over wirer to stop it earthing
          A picture is worth a 1000 words, in this case more.

          Comment

          Working...
          X