Announcement

Collapse
No announcement yet.

Dyna 2000

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Dyna 2000

    Are accel coils and 8.8 wire compatible with dyna 2000

    #2
    Check the resistance specs/requirements for both.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      Originally posted by Mick View Post
      Are accel coils and 8.8 wire compatible with dyna 2000
      Chef is running 3 ohm green dyna coils with the 2000. It just gets hotter spark at 2.2 ohms. The resistor wires will not hurt as you are closer to a stock cool, so I would assume coil is matched to wires not the dyna 2000

      Comment


        #4
        The yellow Accel coils are 3 Ohm and are compatible with electronic ignitions. I ran them on my GPz750. They will be fine with a Dyna 2000.

        Comment

        Working...
        X