Announcement
Collapse
No announcement yet.
self cancel bypass
Collapse
X
-
self cancel bypass
I cannot post in other areas due to insufficient posts 79 GS850GN indicator cancelling unit, is it possible to by pass this unit to allow manual operation of the indicators, mine are playing up but only on one side as it cancels more or less immediately but the other side ok. a pain in the a*se. Thanks in advanceTags: None
-
Forum LongTimerBard Award Winner
GSResource Superstar
Past Site Supporter- Jul 2005
- 15153
- Marysville, Michigan
Last edited by rustybronco; 07-15-2014, 07:59 AM.
-
Locomotion
-
Locomotion
So just to be sure this is basically what I need to do, the coloured wires being those from the 4 pin plug from the now defunct TSCU and tape up the 6 plug.
Comment
-
That's what I did with my bike. Leave the spring in the switch and get used to using it manually. It's a little awkward at first clutching and holding the lever, but it becomes second nature quickly and you will never inadvertently leave your turn signals on again.http://www.thegsresources.com/_forum...ine=1440711157'78 GS1000E, Dyna-S ignition, Dyna Green Coils, K&N pods, Delkevic SS 4-1 exhaust, Dynojet Stage 3 jet kit, Russell SS Brake Lines, Progressive suspension, Compu-Fire series Regulator 55402 and Advmonster cree LED headlight conversion.
Comment
-
Locomotion
I expect there's a way of wiring in a gs750 switch, I will look into that which also gives the option of pilot light seperate from headlights
Comment
Comment