.png "Powered by vBulletin")
Alright to start off this is NOT a help, my blinkers won't work thread. I just installed LED's on my fiance's 750L and wanted to pass along a handy little part with an extra bit of service thrown in.
This is probably the typical electronic flasher most of us get but the seller I bought from, Diode Dynamics Automotive Customization went a little further and threw in premade jumper wires with the proper spade connectors crimped on for each of the three legs to make wiring in this flasher absolutely painless. On the L it was plug and play minus adding a ground wire to the third leg as seen here http://www.thegsresources.com/_forum...05&postcount=7 but aside from that it could not have been any simpler. Thought I'd pass on a nice experience and purchase.
This is probably the typical electronic flasher most of us get but the seller I bought from, Diode Dynamics Automotive Customization went a little further and threw in premade jumper wires with the proper spade connectors crimped on for each of the three legs to make wiring in this flasher absolutely painless. On the L it was plug and play minus adding a ground wire to the third leg as seen here http://www.thegsresources.com/_forum...05&postcount=7 but aside from that it could not have been any simpler. Thought I'd pass on a nice experience and purchase.