Announcement

Collapse
No announcement yet.

coil relay mod without hacking up harness

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    coil relay mod without hacking up harness

    when i changed my rr i did a lot of reading
    i'm not one who likes to hack into stuff if i can, i always like to leave the factory stuff just incase

    so i mounted a relay right by the coils themselves
    i ran a new 12v+ from the battery to the 30 pin
    the 86 was wired to a ground -
    87 was then sent to the coils +
    and 84 was the signal from the stock wiring that went to coil +

    this way the stock harness wiring basically tells the relay to power the coils

    very easy
    simple
    clean
    out of the way, stays dry
    and easy to swap back if for some reason the relay dies on a ride without having to take the tank or side covers off

    works great
    bike starts very fast

    #2
    Originally posted by gs1100ez View Post
    when i changed my rr i did a lot of reading
    i'm not one who likes to hack into stuff if i can, i always like to leave the factory stuff just incase

    so i mounted a relay right by the coils themselves
    i ran a new 12v+ from the battery to the 30 pin
    the 86 was wired to a ground -
    87 was then sent to the coils +
    and 84 was the signal from the stock wiring that went to coil +

    this way the stock harness wiring basically tells the relay to power the coils

    very easy
    simple
    clean
    out of the way, stays dry
    and easy to swap back if for some reason the relay dies on a ride without having to take the tank or side covers off

    works great
    bike starts very fast
    Additional links. Make sure the relay is vibration isolated. Also check voltage to your ignitor.

    Technical Info posts that are deemed to be important or popular will be placed here for easier access. If you feel a post should be moved from the Technical Info forum to here then PM the Administrator with your request.




    Comment


      #3
      Did you put a fuse inline to the "30 pin"?
      Daniel

      https://www.thegsresources.com/_foru...ine=1539562056

      1973 Honda ST90
      1983 Suzuki GS1100GK

      Comment


        #4
        yes i did put a fuse in before the relay to the 12+

        posplayr
        those are some of the things that i read prior to doing the mod, some good info you put out there

        Comment

        Working...
        X